CartiGen體外三維軟骨組織機械力刺激培養分析系統能夠?yàn)樯锓磻?yīng)器內的生多種細胞和組織生長提供壓應力培養。

培養室種類多樣，單室可以容納一個樣本的直徑30毫米x厚 5毫米的組織樣品。

12孔培養室可以容納大小不超過10毫米直徑x 5毫米厚的12個樣品，培養室種類多。

系統使用40N線型電機來監控/控制集成的負載細胞，提供各種波形，用戶甚至可以自定義波形。

系統優勢：

1．所有組件都可以高溫高壓**

2．換液過程中無需打開培養室，直接通過魯爾接口配件完成換液。

3．輕量級設計,便于處理

4．表面容易清洗，耐腐蝕

5．緊湊的設計，符合標準6.5英尺孵化器

6．具有完善的售后服務體系，給你100%的滿意，保質保修。

培養室型號

C10-12：反應器中可放進12個樣品

C9-x ：反應器中可放進9個樣品

C1-x ：反應器中可放進1個樣品，直徑可達25mm

參數

高度：266 mm

*大力值：44N

連續力值： 20N

重量：2.2KG

 主要參數：

1.波形控制：正弦波形（自定義振幅和時間）

2.         無菌培養室體積：60毫升

3.         Growthworks®控制系統軟件：多波形控制，數據采集和多電機運行控制。

4.         4.200mmHg的壓力峰值負荷

5.         *大軸向行程長度為：±4.5mm（±3.75 mm，10 Hz）

6.         頻率范圍：0～20 Hz

7.         腔室個數：1～12個

8.         系統：直徑30毫米x厚 5毫米

9.         GrowthWorks可以配置為同時四個刺激器和同時監控多達8個傳感器

10.     *大軸向行程長度為：±4.5mm（±3.75 mm，10 Hz）

11.     集成光學傳感器的位移測量系統

CartiGen: Mechanical Compression Bioreactor Systems

BISS TGT's Series of bioreactors provide mechanical stimulation to three dimensional tissue engineered constructs to create physiological conditions in-vitro. The CartiGen system imparts compressive or hydrostatic stress (CartiGen HP) to a cartilage construct. The stress/strain profiles can be defined by the user and can be a simple harmonic (sinusoidal) or a physiological waveform. Applications include the investigation of cell function and differentiation, pharmaceutical benchtop testing, and the seeding and growth of engineered tissues and medical devices. Researchers are currently utilizing these systems in a wide range of research areas including:

• Stem cell stimulation
• Meniscus regenerative medicine
• Chondrocyte stimulation

Mechanical Compression Bioreactor Configurations: 

BISS recognizes that research requirements can vary widely depending on the application and intended use.  We have a series of standard mechanical compression bioreactor system configurations to choose from.

Single Sample: C10-1

The C10-1 system has been designed as a single sample bioreactor system that is able to support a wide range of cell and tissue growth experiments utilizing compression. The chamber can accommodate a single sample with a maximum size of 30 mm diameter x 5 mm thick. Optional features such as additional mechanical transducers customize the instrument for the specific research application.

Multi-Sample & Imaging: C10-12c 

The C10-12c system has been designed as a multi-sample bioreactor system that is able to support a wide range of cell and tissue growth experiments. This chamber can accommodate up to 12 disc shaped samples with a maximum size of 10mm diameter x 5mm thick. The C10-12c's unique design includes optical grade windows on the bottom of the chamber, allowing researchers to view their samples with a confocol microscope without interrupting the culturing process. Optional features such as additional mechanical transducers customize the instrument for the specific research application.

Multi-Sample & Perfusion: C9-x 

The C9-x system has been designed as a multi-sample bioreactor system that is able to support a wide range of cell and tissue growth experiments. The chamber can accommodate up to 9 disc shaped samples with a maximum size of 8mm diameter x 5mm thick. The C9-x's unique design integrates porous platens within the bottom of the chamber to permit perfusion through the sample constructs. This feature allows researchers to direct flow through the construct while applying oscillatory compressive stimulation. Optional features such as additional mechanical transducers and perfusion systems customize the instrument for the specific research application.

Bioreactor Stimulator

Each of the CartiGen systems applies load using a 40N linear motor and monitored/controlled using an integrated load cell. The motor also incorporates a displacement transducer for monitoring and controlling the applied displacement. The motor delivers user defined waveforms of physiological significance.

GrowthWorks® Software & Control:

A fifth generation design, the GrowthWorks Software and Control platform includes advanced capabilities, such as multiple waveform control, data acquisition and multi-motor operation. The intuitive software runs on a Windows® laptop computer and features a simple user interface. User defined stimulation profiles are controlled by the software and are readily monitored using graphical displays. Integrated data acquisition routines capture and record data at user prescribed intervals. The GrowthWorks Software is configurable for running four stimulators while simultaneously monitoring up to 16 transducers, allowing the researcher maximum flexibility.

The GrowthWorks Control Hardware features an embedded Intel CPU, integrated data acquisition and integrated motor drives. Communications between the laptop and control hardware is transmitted over a standard network cable. Primary advantages of the TGT Laptop/Controller approach are reduced physical size and easy upgradability. As future Windows versions or higher performance Laptops become available, either can be replaced without any software or controller changes. This ensures the GrowthWorks control system will be an integral part of your research for many years to come.