器官灌流和生物反應器系統
跟蹤器官灌流研究或中空纖維生物反應器系統的生命跡象。
1、優化灌流和生物反應器，在線監測這些重要的參數。
2、理想的肝，腎，肺，心臟和其他灌注器官組織。
3、監測中空光纖和其他連續流動生物反應器，不可或缺的裝置。
優勢：
1、理想的器官灌流研究。Ultra-P pH, pO2, 和 pCO2c電*很適用于肝，腎，肺，心臟和其他灌注器官組織研究。
2、應用在細胞灌流研究。微型溢流電*可以應用于各種動物或植物細胞的灌流研究。
3、所有的組件都不會產生排斥。所有的電*組件都是由玻璃、含氟聚合物、塑膠、環氧樹脂，他們與灌流液完全兼容，并且可以無泄漏連接。
4、低容量溢流系統。所有的溢流電*都有較小的內部容量，流動率沒分鐘1-150 ml。
5、使用硅橡膠管或者其他柔韌的管。電*終端部件有軟管倒鉤裝置，硅橡膠管或者其他柔韌的管如果滑落倒鉤裝置，也不會引起泄露。
6、透光流動的細胞。透光流動的細胞有利于簡單的氣泡檢測和氣泡消除。
7、連續記錄pH、 pO2 和 pCO2c。pO2溢流組件可以直接安裝任何標準的帶狀圖表記錄器，進行持續研究。pH和 pCO2c溢流組件連接任何標準的帶狀圖表記錄器，使用一個 Lazar pH/millivolt 計量儀或者任何標準的實驗室pH/millivolt 計量儀。
8、快速響應。所有溢流電*參數每增長50%反應時間小于30秒。
規格：
MODEL FTPH-2 FLOW THROUGH PH ELECTRODE
PH值范圍：1-13
溫度范圍：0-80
內部容量：小于50微升
電纜接頭：U.S. Standard, BNC, Radiometer 或其他標準計量儀。電纜長度標準：30英寸。
響應時間：每個PH裝置小于10秒鐘
液體流動裝置：微型軟管倒鉤接頭兼容任何標準尺寸的硅橡膠或其它類型的軟管。
MODEL DO-166FT FLOW THROUGH PO2 ELECTRODE
pO2范圍：0-760 Hg
溫度范圍：0-50
內部容量：小于200微升
電纜接頭：雙香蕉插頭可連接條帶記錄器或者U.S. Standard, BNC, or Radiometer可連接PH計量儀。電纜長度標準：30英寸。
響應時間：90%閱讀小于12秒鐘。
液體流動裝置：微型軟管倒鉤接頭兼容任何標準尺寸的硅橡膠或其它類型的軟管。
MODEL GS-136COFT FLOW THROUGH PCO2 ELECTRODE
pCO2范圍：0-500mmHg
溫度范圍：0-50
內部容量：小于200微升
電纜接頭：U.S. Standard, BNC, Radiometer 或其他標準計量儀。電纜長度標準：30英寸。訂購請注明
響應時間：改變100mmHg 小于20秒鐘
液體流動裝置：微型軟管倒鉤接頭兼容任何標準尺寸的硅橡膠或其它類型的軟管。
訂貨須知：
完整的3個參數檢測系統包括pH、PO2、PCO2溢流模塊，他們由微電*和微型溢流細胞的輸入和輸出端口組成；三個參數pH PO2、PCO2各自有獨立的分析器用 RS232輸出；分析器有三個USB轉換器標志，RS232可插入電腦USB端口。電腦完整的軟件程序可將三個參數檢測、記錄和制圖。
單參數溢流組件：
Model FTPH-2 - micro flow through pH electrode module 微型溢流PH電*組塊
Model DO-166FT micro flow through pO2 system 微型溢流PO2系統
Model GS-136COFT micro flow through pCO2 system 微型溢流PCO2系統
Model ISM-146 NAFT - micro flow through sodium system 微型溢流鈉系統
Model ISM-146CLFT - micro flow through chloride system 微型溢流氯化物系統
Model ISM-146KFT - micro flow through potassium system 微型溢流鉀系統
Organ Perfusion Monitoring System
|
|
Multiparameter monitoring System for
Organ Perfusion and bioreactor Systems
|
Track the vital signs of your organ perfusion study or hollow fiber bioreactor system.
-
Optimize your perfusion or bioreactor by monitoring these vital parameters online
-
Ideal for liver, kidney, lung, heart, and other perfused organ tissues
-
Indispensable for monitoring hollow fiber and other continuous flow bioreactors.
ADVANTAGES:
-
IDEAL FOR ORGAN PERFUSION STUDIES. The Ultra-P micro flow through electrodes for pH, pO2, pCO2, and temperature are ideally suited for perfusion studies in liver, kidney, heart, lung, and other perfused organ systems.
-
USED IN CELL PERFUSION STUDIES. The Micro flow through electrodes can also be used in cell perfusion studies of various animal and plant cells.
-
ALL BIOCOMPATIBLE COMPONENTS. All electrode components are made of glass, fluoropolymer, acrylic, and epoxy and are completely compatible with perfusate media.
-
LOW VOLUME FLOW THROUGH SYSTEMS. All flow through electrodes have low internal volumes and are designed for flow rates between 1 and 150 ml per minute.
-
USE WITH SILASTIC OR OTHER FLEXIBLE TUBING. Electrodes come with hose barb end fitting. Just slip the silastic or other tubing over the hose barb fitting for a leak free connection.
-
OPTICALLY CLEAR FLOW CELLS. Optically clear flow cells make for simple visual bubble detection and bubble elimination.
-
CONTINUOUSLY RECORD PH, PO2, PCO2, AND TEMPERATURE. The pO2, and temperature flow-through modules plug directly into any standard strip chart recorder for continuous recording. The pH and pCO2 flow-through modules can be interfaced to a strip chart recorder using a Lazar pH/millivolt meter or any standard laboratory pH/millivolt meter.
-
RAPID RESPONSE. Response time for all the flow through electrodes is less than 30 seconds for a 50% increase in the parameter being monitored.
SPECIFICATIONS
MODEL FTPH-2 FLOW THROUGH PH ELECTRODE
pH range: pH 1 to 13
Temperature Range: 0 to 80 oC
Internal Volume: less than 50 microliters
Connector Cable: Available in U.S. Standard, BNC, Radiometer, * or other common pH meter connectors. Standard 30 inch cable length. Specify connector type when ordering. Response Time: Less than 10 seconds per pH unit.
Fluid Flow Fittings: Miniature hose barb connectors compatible with standard size silastic or other types of flexible tubing.
MODEL DO-166FT FLOW THROUGH PO2 ELECTRODE
pO2 range: 0 to 760 Hg.
Temperature Range: 0 to 50 oC
Internal Volume: Less than 200 microliters
Connector Cable: Available in dual banana plug for Interface with strip chart recorder or U.S. Standard, BNC, or Radiometer* plug for Interrace with pH meter. 30 inch cable length. Specify connector type when ordering.
Response Time: Less than 12 seconds for 90% of reading
Fluid Flow Fittings: Miniature hose barb connectors compatible with standard silastic or other types of flexible tubing.
MODEL GS-136COFT FLOW THROUGH PCO2 ELECTRODE
pCO2 range: 0 to 500 mm Hg.
Temperature Range: 0 to 50 oC
Internal Volume: Less than 200 microliters
Connector Cable: Available in U.S. Standard, BNC, or Radiometer* or other common pH meter connectors. 30 inch cable length. Specify connector type when ordering.
Response Time: Less than 20 seconds for 100 mm Hg change.
Fluid Flow Fittings: Miniature hose barb connectors compatible with standard silastic or other types of flexible tubing.
MODEL T-176FT FLOW THROUGH TEMPERATURE PROBE
Temperature Range: 0 to 100 oC
Internal Volume: less than 50 microliters Connector
Cable: Available in dual banana plug for interface with strip chart recorder or U.S. Standard, BNC, or Radiometer* for interface with pH meter. 30 inch cable length. Specify connector when ordering.
Response Time: Less than 10 seconds for 20 oC change
Fluid Flow Fittings: Miniature hose barb connectors compatible with standard silastic or other types of flexible tubing.
ORDERING INFORMATION
COMPLETE MULTIPARAMETER MONITORING SYSTEMS Model PFS-1
Complete 4 parameter monitoring system including pH, pO2, pCO2, and temperature flow-through modules. Instrument console, flow cell tray, digital display monitor and output connector for direct connection to strip chart recorder. pH and pCO2 each require a separate pH/millivolt meter to use with strip chart recorder. pO2 and temperature proves plug directly into strip chart recorder.
Model PFS-2 perfusion monitoring system.
Same as above, but includes 2 digital pH/millivolt meters for use with pH and pCO2 flow-through module. A complete 4 parameter system for direct interface with a strip chart recorder.
COMPUTER INTERFACE SYSTEMS
-interface your multiparameter monitoring system with your pc
Model PC-201 computer interface for IBM or compatible computer.
Includes A to D convertor (analog to digital), interconnect cable and software package. Connects directly to Model PFS-2 perfusion monitoring system.
Model PC-301 computer with interface.
Includes computer with 640K RAM, floppy disk, keyboard, monochrome monitor, A to D converter, interconnect cable, and software package. Connects directly to Model PFS-2 perfusion monitoring system. Computer system can also be used to monitor other laboratory parameters such as temperature, pressure, and pH.
SINGLE PARAMETER FLOW THROUGH MODULES
Model FTPH-2 - micro flow through pH electrode module
Model DO-166FT micro flow through pO2 system
Model GS-136COFT micro flow through pCO2 system
Model T-176 - micro flow through temperature system
Model ISM-146 NAFT - micro flow through sodium system
Model ISM-146CLFT - micro flow through chloride system
Model ISM-146KFT - micro flow through potassium system