Moxi GO & Moxi GO II流式細胞儀—現貨促銷

2 PMT system 525/45nm (e.g. FITC, GFP) and 561nm/LP (PE, PI)

Overview

3 or 4 Parameter Next Gen Flow

Increase the pace of scientific discovery with ORFLO’s next generation Moxi Go? or Moxi Go II? Next Gen Flow Cytometers. With a one (Moxi GO) or two (Moxi GO II) fluorescent channels, swappable filter sets (MXG002 - Moxi GO 488nm), configurable laser the Moxi Go can be designed to meet your labs cell analysis needs.  Every assay also delivers simultaneous cell count & volume determination, using single-use flow cell.  This eliminates the hassle of traditional flow associated with cleaning, maintenance, clearing of clogs, cross contamination and occasionally replacement of bottles and tubes.  

Furthermore the Moxi Go? or Moxi Go II? use very little sample volume, 75ul's allowing you to conserver precious, expensive sample, such as stem cells.  Cell concentrations as low as 10,000 cells per ml are possible, which most experiments would enable a little as 5ul's of sample diluted in 70ul's of PBS.

The Moxi Go? or Moxi Go II? can be utilized as an assay development instrument and many powerful cell based assays can easily be optimized and run on the system.  These include:

• Cell surface immuno-labeling
• In-Cell Protein Quant
• CRISPR/Transfection Optimization Studies
• Up to 4 plex bead based ELISA's using our new on board MPX Relative Quantitation Ap
• In cell Wester Blots
• Reactive Oxidation Species Experiments
• Calein AM studies
• Phagocytosis Analysis
• Mito Potential Experiements

The Moxi Go? or Moxi Go II? come standard with an ultra-intuitive, plug-and-play interface with free OS updates as long as you own the instrument. No prior flow cytometry experience is required you simply just plug and play.

參數規格：

Step 1:

Select desired app, insert the cassette and close the doors.

Step 2:

Once auto-alignment is complete, open the top door and pipette 75μl of labelled sample into the cassette.

產品描述

                       備有庫存現貨，隨時發貨

ORFLO Technologies總部位于美國愛達荷州，擁有多項國際**技術，如微流控、生物信號向電子信號轉化、數據采集和分析、配套分析軟件設計等，**于現代細胞分析技術**和開發,在國際細胞分析技術競爭中處于**的地位。

ORFLOTechnologies 2010年開發****個掌上細胞計數儀，產品一經推出，很快受到業內廣泛認可。目前推出*新代迷你細胞計數儀Moxi Z和掌上流式細胞儀MOXI FLOW。

 

世聯博研（北京）科技有限公司正式做為Orflo中國代理商，主要產品包括Moxi Flow微型流式細胞儀及MoxiZ細胞計數產品系列等。

配套耗材：

一、Moxi Z 微型自動細胞計數儀配套芯片(Cell Counting Cassettes)

芯片覆蓋直徑范圍（2-34微米）內的所有細胞樣品，無需根據細胞大小進行更換，

每個芯片可做2個測試。當樣品1完成后，只需取出，將芯片的另一端插入Moxi Z，加入樣品2。

在一次性盒式芯片中具有更高的性能和簡單性。

Moxi Z獨特的**保護薄膜細胞計數盒可在8秒鐘內提供高精度，可重復的細胞計數和細胞大小分析（S型盒帶15秒）。受全球**計數系統使用的金標準Coulter原理的啟發，Moxi盒每個測試通過一個細胞感測區域流動數千個細胞，以準確捕獲樣品中每個單個細胞的基于阻抗的體積測量?；趫D像的細胞計數方法，單個細胞的基于阻抗的細胞計數被證明是超過95％的準確度，而75％的準確度。

沒有系統污染和集成預過濾器防止堵塞。

Moxi盒式芯片設計有獨特的“細胞篩”，以*大限度地減少細胞結塊和堵塞。另外，Moxi盒含有100％的樣品在盒體內，消除了系統污染和**的可能性。

1、Moxi Z S型細胞計數芯片（Moxi Z Type S Cassettes）

The Type S cassette is ideal for accurately measuring most yeast and other particles as small as 3 μm and up to 20 μm in average diameter including some algae and protozoa. Since the technology is based on a volumetric measurement, non-spherical particles (14 - 4,200 fL) can also be measured accurately.

S型細胞計數芯片非常適用于**測量大多數酵母和其他顆粒，平均粒徑小至3μm，直徑達20μm，包括一些藻類和原生動物。 由于該技術基于體積測量，因此也可以準確測量非球形顆粒（14-4,200fL）。

Cell Counting Cassettes

Higher Performance & Simplicity in One Disposable Cassette.
Moxi Z's unique, patent-protected thin-film cell count cassettes provide highly accurate, repeatable cell counts and cell size analysis in under 8 seconds (15 seconds for Type S cassette). Inspired by the gold-standard Coulter Principle used in high-end counting systems worldwide, the Moxi cassette flows thousands of cells per test through a cell sensing zone to accurately capture the impedance-based volumetric measurement of each individual cell in the sample. Impedance-based cell counting of individual cells is proven to be over 95% accurate versus a 75% accuracy with image-based cell counting methods. 

No system contamination and integrated pre-filter for clogging prevention. 
Moxi cassettes are designed with a unique "cell sieve" to minimize cell clumping and clogging. In addition, Moxi cassettes contain 100% of your sample within the cassette body, eliminating the possibility for system contamination and sterilization. Cassettes are simply and easily discarded when testing is finished.

Moxi Z Type S Cassettes

The Type S cassette is ideal for accurately measuring most yeast and other particles as small as 3 μm and up to 20 μm in average diameter including some algae and protozoa. Since the technology is based on a volumetric measurement, non-spherical particles (14 - 4,200 fL) can also be measured accurately.

Moxi Z Type S Pack (25 Cassettes)

  |  

Moxi Z Type S Box (250 Cassettes)

Moxi Z Type M Cassettes

The Type M cassette is ideal for accurately measuring mammalian cells or other particles 4-25 microns in average diameter. Since the technology is based on a volumetric measurement, non-spherical particles (34-8,180 fL) can also be measured accurately.

Moxi Z Type M Pack (25 Cassettes)

  |  

Moxi Z Type M Box (250 Cassettes)

MOXI Z System Check Beads (5 mL) Product Code: MXA005 MOXI Z System Check Beads (5 mL) Sh List
Related Products Accessories Cassettes Instruments Specifications id MXA005 Application Notes Can be used to check proper system function. Bead Diameter 10 micron Compatible Instruments Moxi Z Concentration 1.1 e+5 beads/mL Formulation Orflo Diluent Intended Use Statement For Research Use Only. Product is not for use in diagnostic procedures Material of Construction Polystyrene Overall Dimensions 22.1 mm^3 Sterility Non-sterile Weight 5 mg

Moxi Z Diluent Product Code: MXA006 Moxi Z Diluent, 100 mL
Related Products Reagents Accessories Cassettes Instruments Specifications id MXA006 Application Notes Moxi Z Diluent is special formulated for use with the Moxi Z system for optimal sizing of particles and for operation with the instrument's Small Particle Mode (SPM). Applications Cell Dilution Applications Abbreviation Cdil Cassette Types Type M|Type S Compatible Instruments Moxi Z Formulation Proprietary Intended Use Statement For Research Use Only. Product is not for use in diagnostic procedures Kit Components One 100 ml bottle of diluent Number of Tests n/a Overall Dimensions 52 L x 52 W x 106 H (mm) Protocol Pellet and resuspend cells in Moxi Z diluent or dilute sample with >90% Moxi Z diluent. 2. Pipette 10 uL of sample into tube 3. Pipette 90 uL of Orflo Diluent into tube 4. Gently mix resulting solution to ensure cells are evenly mixed 5. Pipette 75 uL of resulting solution into Moxi Z Cassette, or 50 uL into Moxi Flow cassette 6. Touch screen to run test Sample Type Mammalian Cells|Large Yeast|Large Algae|Protozoa Sterility Non-Sterile Storage Stability AND Handling Store at 2-8C. Use sterile technique when handling. Dispose of waste product in compliance with federal, state and local regulations. Do not inhale or ingest. Avoid contact with eyes and skin, flush affected area with water for at least 15 minutes Vendor ORFLO Weight 152 g

Moxi Z Diluent, sample Product Code: MXA009 Moxi Z Diluent,  5 mL See Product Specifications
Related Products Reagents Accessories Cassettes Instruments Specifications id MXA009 Application Notes Moxi Z Diluent is special formulated for use with the Moxi Z system for optimal sizing of particles and for operation with the instrument's Small Particle Mode (SPM). Applications Cell Dilution Applications Abbreviation Cdil Cassette Types Type M|Type S Compatible Instruments Moxi Z Formulation Proprietary Intended Use Statement For Research Use Only. Product is not for use in diagnostic procedures Kit Components One 5 ml bottle of diluent Number of Tests 75 Overall Dimensions 25 W x 45 H (mm) Protocol Pellet and resuspend cells in Moxi Z diluent or dilute sample with >90% Moxi Z diluent. 2. Pipette 10 uL of sample into tube 3. Pipette 90 uL of Orflo Diluent into tube 4. Gently mix resulting solution to ensure cells are evenly mixed 5. Pipette 75 uL of resulting solution into Moxi Z Cassette, or 50 uL into Moxi Flow cassette 6. Touch screen to run test Sample Type Mammalian Cells|Large Yeast|Large Algae|Protozoa Sterility Non-Sterile Storage Stability AND Handling Store at 2-8C. Use sterile technique when handling. Dispose of waste product in compliance with federal, state and local regulations. Do not inhale or ingest. Avoid contact with eyes and skin, flush affected area with water for at least 15 minutes Vendor ORFLO Weight 11 g

Orflo Accutasea Product Code: MXA020 Orflo Accutase cell detachment solution, 1X, 100 mL
Supporting Resources Related Products Reagents Assays Antibodies Cassettes Instruments Specifications id MXA020 Application Notes Recommended for the detachment of adherent cells and dissociation of mammalilian cell lines and primary cells Applications Cell Detachment Applications Abbreviation Cdet Cassette Types Type M|Type S|Type MF-M|Type MF-S Cell Types Tested fibroblasts|keratinocytes|vascular endothelial cells|hepatocytes|vascular smooth muscle cells|hepatocyte progenitors|primary chick embryo neuronal cells|bone marrow stem cells|adherent CHO and HNK cells|macrophages|293 cells|L929 cells|immortalized mouse testicular germ cells|MIC5|3T3|Vero|COS|HeLa|NT2|MG63|M24 and A375 metastatic melanoma|gliomas U251|D54|HT1080 fibrosarcoma cells|HT29 colon cancer cells|Sf9 insect cells|human embryonic stem cells|human mesenchymal stem cells|and human neural stem cells. Compatible Instruments MoxI Z|Moxi Flow|zEPI Flow Formulation Accutase® enzymes in Dulbecco's PBS containing 0.5 mM EDTA and phenol red. 1X concentrate, no preservatives. Intended Use Statement For Research Use Only. Product is not for use in diagnostic procedures Kit Components One 100ml bottle of cell dissassociation reagent Number of Tests n/a Overall Dimensions 52 L x 52 W x 106 H (mm) Protocol 1. Place 100ml Accutase bottle in room temp water bath or thaw overnight in fridge 2. For Adherent Cells: a. Remove cell media b. Add 1.5ml Accutase per 25cm2 of flask area c. incubate at RT or 37C until cells detach (typically 5-15min) d. Pipette triturate to break apart clusters 3. For suspension cell aggregates: a. Pellet cells at 300xg, 5min b. Resuspend pellet in 1-2ml Accutase c. Incubate 15min d. Pipette triturate to break apart clusters 4. Count cells on the Moxi Z, Moxi Flow, or Zepi Flow (be sure to dilute samples into standard operating range of specific cassette, if they are above the stated concentration limits) Sample Type Primary Mammalian cells|immortalized adherent cells|non-ES cell types Sterility Sterile Storage Stability AND Handling Stable at -20C. After thawing can be stored for up to 2 months at 2-8C. Tradename ACCUTASE? is a registered trademark of Innovative Cell Technologies Vendor ORFLO Weight 159 g

Orflo Accumaxa Product Code: MXA021 Orflo Accumax, cell dissassociation reagent, 10X, 100 mL, sterile
Supporting Resources Related Products Reagents Assays Antibodies Cassettes Instruments Specifications id MXA021 Application Notes Recommended for use with the Moxi Z and Moxi Flow platforms when working with clumpy aggregated cells. It is ideal for generating single cell suspensions from clumped cell cultures, detachment of cells from primary tissue and detachment of cells from plastic tissue culturware. Accumax is specifically designed for our combination fluorescence amp impedance based flow cytometers. Applications Cell Detachment Applications Abbreviation Cdet Cassette Types Type M|Type S|Type MF-M|Type MF-S Compatible Instruments MoxI Z|Moxi Flow|zEPI Flow Formulation 10X proprietary solution of proteolytic, collagenolytic and DNase enzymes and does not contain mammalian or bacterial derived products. Intended Use Statement For Research Use Only. Product is not for use in diagnostic procedures Kit Components One 100ml bottle of cell dissassociation reagent Number of Tests n/a Overall Dimensions 52 L x 52 W x 106 H (mm) Protocol 1. Place 100ml Accumax bottle in room temp water bath or thaw overnight in fridge 2. For Adherent Cells: a. Remove cell media b. Add 1.5ml Accumax per 25cm2 of flask area c. incubate at RT or 37C until cells detach (typically 5-15min) d. Pipette triturate to break apart clusters 3. For suspension cell aggregates: a. Pellet cells at 300xg, 5min b. Resuspend pellet in 1-2ml Accumax c. Incubate 15min d. Pipette triturate to break apart clusters 4. Count cells on the Moxi Z, Moxi Flow, or Zepi Flow (be sure to dilute samples into standard operating range of specific cassette, if they are above the stated concentration limits) Sample Type Primary Mammalian cells|immortalized adherent cells|Human ES cells|Rodent ES Sterility Sterile Storage Stability AND Handling Stable at -20C. After thawing can be stored for up to 2 months at 2-8C. Tradename ACCUMAX? is a registered trademark of Innovative Cell Technologies Vendor ORFLO Weight 159 g

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!